View TLP176G07_4131905.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP176G
TOSHIBA Photocoupler GaAs Ired & Photo-MOS FET
TLP176G
Modems In PC Modem-Fax Cards Telecommunications
Unit in mm
The TOSHIBA TLP176G consists of gallium arsenide infrared emitting diode optically coupled to a photo-MOS FET in a SOP, which is suitable for surface mount assembly. The TLP176G is suitable for the modem applications which require space savings. * * * * * * Peak off-state voltage: 350V (min) Trigger LED current: 3mA (max) On-state resistance: 35 (max) Isolation voltage: 1500Vrms (min) UL recognized: UL1577, file No. E67349 BSI approved : BS EN60065: 2002, certificate No.8753 BS EN60950-1: 2002, certificate No.8754 * * SEMKO approved: SS EN60065 SS EN60950 Option(V4)type TUV approved: DIN EN 60747-5-2 Certificate No.40009351 JEDEC EIAJ TOSHIBA Weight: 0.1 g
Pin Configuration (top view)
1 4 1-Form-A 4 3
Schematic
1 4
2 1. 2. 3. 4. : Anode : Cathode : Drain : Drain
3 1 2 2 3
1
2007-10-01
TLP176G
Absolute Maximum Ratings (Ta = 25C)
Characteristic Forward current Forward current derating (Ta 25C) LED Pulse forward current (100s pulse,100pps) Reverse voltage Junction temperature Off-state output terminal voltage Detector On-state current On-state current derating (Ta 25C) Junction temperature Total power dissipation Total power dissupation derating(Ta 25C) Storage temperature range Operating temperature range Lead soldering temperature(10 s) Isolation voltage (AC,1 min., R.H. 60%) (Note 1) Symbol IF IF / C IFP VR Tj VOFF ION lON / C Tj PT PT / C Tstg Topr Tsol BVS Rating 50 -0.5 1 5 125 350 120 -1.2 125 350 -0.35 -55~125 -40~85 260 1500 Unit mA mA / C A V C V mA mA / C C mW mW / C C C C Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1): Device considered a two-terminal device: Pin 1 and 2 shorted together and pin 3 and 4 shorted together.
Recommended Operating Conditions
Characteristic Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min. 5 -20 Typ. 7.5 Max. 280 25 100 65 Unit V mA mA C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document.
2
2007-10-01
TLP176G
Individual Electrical Characteristics (Ta = 25C)
Characteristic Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF IF = 10mA VR = 5V V = 0,f = 1MHz VOFF = 350V V = 0,f = 1MHz Test Condition Min. 1.0 Typ. 1.15 30 40 Max. 1.3 10 1 Unit V A pF A pF
Coupled Electrical Characteristics (Ta = 25C)
Characteristic Trigger LED current On-state resistance Symbol IFT RON Test Condition ION = 120mA ION = 120mA,IF = 5mA Min. Typ. 1 22 Max. 3 35 Unit mA
Isolation Characteristics (Ta = 25C)
Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0,f = 1MHz VS = 500V,R.H 60% AC, 1minute Isolation voltage BVS AC, 1second (in oil) DC, 1minute (in oil) Min. 5x10
10
Typ. 0.8 10
14
Max.
Unit pF Vrms Vdc
1500
3000 3000
Switching Characteristics (Ta = 25C)
Characteristic Turn-n time Turn-ff time Symbol tON tOFF Test Condition RL = 200 VCC = 20V, IF = 5mA Min. Typ. 0.3 0.1 Max. 1 1 Unit ms
3
2007-10-01
TLP176G
IF - Ta
100 140 120
ION - Ta
Allowable forward current IF (mA)
(mA) On-state current ION
0 20 40 60 80 100 120
80
100 80 60 40 20
60
40
20
0 -20
0 -20
0
20
40
60
80
100
Ambient temperature Ta (C)
Ambient temperature Ta (C)
IFP - DR
5000 3000 Pulse width Ta = 25 C
IF - V F
< =
100 s
100 50 30 Ta = 25 C
Allowable pulse forward current IFP (mA)
1000 500 300
(mA) Forward current IF
10 5 3
100 50 30
1 0.5 0.3
10 3 10
-3
3
10
-2
3
10
-1
3
10
0
0.1 0.6
0.8
1.0
1.2
1.4
1.6
1.8
Duty cycle ratio
DR
Forward voltage VF
(V)
VF /Ta - IF
1000 -2.8 500
IFP - VFP
Pulse forward current IFP (mA)
Forward voltage temperature coefficient VF /Ta (mV/C)
300
-2.4
100 50 30
-2.0
-1.6
-1.2
10 5 3 1 0.6
Pulse width Repetitive
< =
10 s
-0.8
Frequency = 100 Hz Ta = 25 C
-0.4 0.1
0.3 0.5
1
3
5
10
30
50
1.0
1.4
1.8
2.2
2.6
3.0
Forward current IF
(mA)
Pulse forward voltage
VFP (V)
4
2007-10-01
TLP176G
IFT - Ta
5 ION = 120 mA 150 Ta = 25 C IF = 5 mA
ION - VON
Trigger LED current IFT (mA)
(mA) On-sate current ION
-20 0 20 40 60 80 100
4
100
50
3
0
2
-50
1
-100
0 -40
-150 -2.5
-1.5
-0.5
0.5
1.5
25
Ambient temperature Ta (C)
On-state voltage VON
(V)
RON - Ta
40 ION = 120 mA IF = 5 mA 1000 500
IOFF - Ta
VOFF = 350 V
On-state resistance RON ()
30
(nA) Off-state current IOFF
-20 0 20 40 60 80 100
300
100 50 30
20
10 5 3
10
0 -40
1 -20
0
20
40
60
80
100
Ambient temperature Ta (C)
Ambient temperature Ta (C)
tON - Ta
1000 VDD = 20 V RL = 200 IF = 5 mA 400
tOFF - Ta
VDD = 20 V RL = 200 IF = 5 mA
(s)
(s) Turn - off time tOFF
-20 0 20 40 60 80 100
800
300
Turn - on time tON
600
200
400
100
200
0 -40
0 -40
-20
0
20
40
60
80
100
Ambient temperature Ta (C)
Ambient temperature Ta (C)
5
2007-10-01
TLP176G
PT - Ta
400
PT (mW) Total power dissipation
300
200
100
0 -40
0
40
80
120
Ambient temperature Ta (C)
6
2007-10-01
TLP176G
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
7
2007-10-01

▲Up To Search▲

Price & Availability of TLP176G07

	To Download TLP176G07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .